Home News World Error 1068 : the dependency service or group failed to start

Error 1068 : the dependency service or group failed to start

1397
0

Error 1068: the dependency service or group failed to start : Hi, Friends. Today I will be sharing some exciting information on the topic of Fixing Error 1068 (The Dependency Service or Group Failed). Please go on the article and enjoyed reading it.

Fixing Error 1068 (The Dependency Service or Group Failed)

The Error 1068 has dependency service failed to start firewall by which all means something one will not want to experience the issue is quite disturbing as it pops up out of the blue when one tries to start the Windows Firewall.

Undoubtedly, one should not turn a blind eye to this problem. Because leaving it the Windows Firewall that is disabled makes the PC more liable to unauthorized access. Therefore, now the time to solve this matter.

If one should see the error 1068 for the first time. Restart the PC. That simple manoeuvre was reported to have to help many users in eliminating the issue in the questions.

However, if the error code 1068 will keep coming even after the restart, one should get ready for troubleshooting.

First and essential, to back up the files using a cloud drive, a portable storage device, or special software like Auslogics Bit Replica for this work will leave permanent data loss. Save one with a lot of sweat and tears. When one is done with that, started to the below fixes.

How to resolve the dependency service or group failed to start on Windows 10:

1. Turn on the Windows Firewall, using the Run

To begin with, let us try this workaround:

Same time press the Windows logo key and R on the keyboard

Input services.music without the quotes and hit on button Enter

One will see a list of services

Locate the Firewall -> Right-click on it -> then Select Properties

Choose the Start -> Then set the startup type to Automatic

Apply -> OK -> Restart the computer for the changes to take effect

Check if the issue is still present.

2. Temporarily, the antivirus disable

We are trying to do this because Windows Firewall may fight with the non-Microsoft antivirus program to turn it off and see if the problem has gone. If it has, then reports the vendor’s issue to entrust another solution with the computer’s safety.

3. Run an anti-malware scan

Error 1068 has dependency service failed to start the firewall that might come from the PC, malware-infected. Therefore, enable the third-party antivirus and let it do its job.

One can try employing Windows Defender if it has not been affected by the problem:

Open the Start menu -> then Navigate to the Settings icon

Move to Update, and Security -> then Select Windows Defender

Open Windows Defender and to make it run a full scan of the system

Finally, the best thing of action would be to use a unique anti-malware tool. To inspect every problem and opening of Windows 10. Auslogics Anti-Malware will do that for one.

It will ensure that there is no malware whatsoever, keeping a low profile in the background.

4. Visit the centre of Windows Update

There may be something wrong with the updates. For example, The OS might be sitting on them, which produces mishaps like dependency service or group failed to start Windows 10.

If that is your case, then do the following:

Press Windows logo key + I on the keyboard to open the Settings app -> Select Update and Security.

Check for the updates -> Download the available updates and confirm the installation process.

Restart the PC and trying to run Windows Firewall

And here is another picture: to resolve the issue, one might need to undo the recent updates as some may be a defect.

Here is how to do that:

Same way, hit the Windows logo key and I buttons -> The Settings app will open -> Update and Security

Select Update History -> Proceed to Uninstall Updates

Choose the Update that one wishes to roll back -> Click Uninstall -> Windows will guide one through the process

5. Expand the administrator’s group

It is another easy and reportedly very effective fix for the error 1068 that has dependency service failed to start firewall:

Open an situated command prompt: Windows logo key + S -> Type CMD -> Select Command Prompt -> Right-click on it -> Run as Admin

Input these commands to remember to press Enter after each:

net local group administrators local service or add

net local group administrators network service or add

Close the Command Prompt -> Restart the PC and check if the firewall can run now

6. Reset the network adapter

If the issue with starting the Windows Firewall exists, then try to reset the network adapter.

For this purpose, take the following steps:

Open the situated command prompt and see the previous method.

Then type the following commands by pressing Enter button after each:

  1. netsh winsock reset catalog
  2. netsh int ip reset reset.log hit
  3. Close the cmd and check if this method worked for anyone.

7. Update the network adapter driver

network adapter driver might be a little over the hill. Updating it is likely to help in such a case. One really can carry out a manual search for the latest manufacturer. That is recommended version on the Internet or use Windows Device Manager to do the job for one.

To update the driver with Device Manager, to do the following:

Same way, press the Windows logo key and X buttons -> then Select Device Manager from the list

Locate the network adapter driver -> Right-click on it -> Select Update driver

Restart the PC to apply the changes

However, if one wants to fix all the driver-related problems in just one click, we recommend using Auslogics Driver Updater. This tool will save one a lot of time—the effort by installing the necessary driver versions for the hardware on the computer.

We hope this method has fixed the issue.

8. Reset TCP or IP to default

If one still doesn’t know how to resolve dependency service or group failed to start on Windows

Then resetting the TCP or IP is the next logical step in the rescue mission:

Open a situated command prompt. Then type the following commands without quotes. Make sure to hit Enter button after each:

‘config /flush DNS, not stat –r

net sh int IP reset c:\resetlog.txt

Netshwinsock reset’

Reboot the computer and try to start the Windows Firewall if the error code 1068 is still here, then start with the following fix.

9. Replace the nlasvc.dll

Unfortunately, the nlasvc.dll might be corrupt. So one should reinstall it. To use this method to the advantage, one will need another computer for that it goes well without saying that it must be error-free.

Now follow these instructions:

Start the computer, which has no issues. Then navigates C:\windows\system32\nlasvc.dll.

Copy the nlasvc.dll file to a USB flash drive.

Insert this drive into the problematic PC.

Run the command prompt as an administrator. Input the following commands, on hitting button Enter after each:

  1. Takedown /f c:\windows\system32\nlasvc.dll
  2. calls c:\windows\system32\nlasvc.dll /G your_username:F
  3. (your_username must be the username of your computer)
  4. Then go to C:\windows\system32\nlasvc.dll.
  5. Rename ‘nlasvc.dll’ to ‘nlasvc.dll.old’.

Now copy the nlasvc.dll file from the USB drive.

Right-click on nlasvc.dll and select the Properties.

Opening the Security tab -> Go to the Advanced.

Owner -> Change -> Input NT SERVICE\TrustedInstaller

Checking out the Names -> OK

Apply -> OK

Reboot the PC

10. Repair the registry

All to no available then the Windows Registry might corrupt or damaged, which means it needs repairing. Conducting this process requires expertise and precision in this regard since there is no room for error.

We strongly recommend using a unique tool to avoid complicating matters even more; for instance, Auslogics Registry Cleaner is a free tool.

It can repair the Windows Registry. Enable the computer to run smoothly without running the risk of harming the system.

11. Perform a clean installation of the Windows

Suppose all the methods above have failed to help one. Clean installing the Win 10 might be the last-ditch effort. Indeed, why not give the OS a fresh start?

Here is how one can do that:

Note: Keep in mind that using this choice will fully clean the drive.

So, if one has not backed up the data yet, now is the best time to do that.

12. Use a unique software solution

To diagnose and fix the Dependency Service or Group Failed error, one can also download this tool developed by Auslogics; this solution does not contain malware, but it is free and safe.

Here hope our tips have helped you to fix Error 1068.

These are the vital information on Fixing Error 1068 (The Dependency Service or Group Failed). Here I have mentioned Error 1068 : the dependency service or group failed to start with the solutions and methods.

If Queries or Questions is persisting then, please feel free to comment on the viewpoints.

 Read Also :